Linear guide rail is a precision part, so it should be used with great care. Even if the high-performance linear guide rail is used improperly, it can not achieve the expected performance, and it is easy to damage the linear guide rail! Therefore, the following points must be paid attention to when installing the guide rail:

　　A.可互換產品(即導軌與滑塊可任意匹配的產品)的THK滑塊以安裝在臨時軸上的形式提供。因此，在與直線導軌配合使用時，請注意。

　　A. THK sliders of interchangeable products (i.e. products with any matching of guide rails and sliders) are provided in the form of temporary shafts. Therefore, please pay attention when using with the linear guide rail.

　　B.若擅自拆裝各部件，將導致各部件灰塵進入或組合精度下降。因此，如果沒有必要，請不要隨意拆卸。

　　B. If the components are disassembled without permission, the dust of each component will enter or the combination accuracy will decrease. Therefore, if not necessary, please do not disassemble at will.

　　C.有時只要導軌傾斜，THK滑塊就會移動，所以這時要小心，不要讓THK滑塊從導軌上掉下來。

　　C. Sometimes as long as the guide rail is inclined, THK slider will move, so be careful not to let THK slider fall off the guide rail.

　　D.端蓋為塑料材質。如果用力撞擊或碰撞，它會被損壞，所以要注意。

　　D. The end cover is made of plastic. If you hit or collide with force, it will be damaged, so pay attention.

　　除此之外，我們還需要時刻保持導軌的清潔:

　　In addition, we need to keep the guide rails clean at all times:

　　在設備運行過程中，被加工工件的加工過程中會產生大量的腐蝕性粉塵和煙塵。基于這些煙霧和灰塵沉積表面的導軌和直線軸大量很長一段時間,它有一個偉大的對設備的加工精度的影響,并將表面形成腐蝕斑點的直線軸導軌,縮短設備的使用壽命。為了使機床工作正常穩定，保證產品的加工質量，要認真做好導軌、直軸的日常保養。注意:導軌清洗時請準備好干棉布和潤滑油。雕刻機的導軌分為直線導軌、滾柱導軌。清潔直線導軌:將激光頭移動到右側(或左側),找到直線導軌,用干棉布擦拭,直到塵埃是光明的,加一點潤滑油(可以使用縫紉機油,不使用石油),將激光頭左右慢慢推幾次,這樣石油可以均勻分布。清潔滾子導軌:將橫梁移內側，打開機器兩側的端蓋，找到導軌，用干棉布將導軌與滾子接觸的地方擦拭干凈，然后將橫梁移剩余的地方清潔。

　　In the process of equipment operation, a large number of corrosive dust and dust will be produced during the processing of the processed workpiece. Based on these smoke and dust deposition surface of the guide rail and linear axis for a long time, it has a great impact on the machining accuracy of the equipment, and will form corrosion spots on the surface of the linear axis guide rail, shorten the service life of the equipment. In order to ensure the normal and stable operation of the machine tool and the processing quality of the products, the daily maintenance of the guide rail and the straight shaft should be done well. Note: please prepare dry cotton cloth and lubricating oil when cleaning the guide rail. The guide rail of engraving machine is divided into linear guide rail and roller guide rail. Clean the linear guide rail: first move the laser head to the right (or left), find the linear guide rail, wipe it with dry cotton cloth until the dust is bright, add a little lubricating oil (sewing oil can be used instead of oil), slowly push the laser head left and right several times, so that the stone oil can be evenly distributed. Clean the roller guide: move the crossbeam to the inside, open the end covers on both sides of the machine, find the guide rail, wipe the place where the guide rail contacts the roller with dry cotton cloth, and then move the crossbeam to the rest place for cleaning.

　　以上是導軌絲杠制造商為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.pet998.com

　　These are the related contents introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com